3M Scotch ATG Adhesive Transfer Tape 924, Clear, 1.9 cm x 54.9 m (0.75 in x 60 yd) | Permanent Bond for Crafts & Framing

• POWERFUL ADHESIVE PERFORMANCE: Provides immediate and permanent bonds with high adhesion, good shear-holding power, and UV resistance — all while remaining low odor
• TRIED AND TESTED: This tape utilizes 3M Adhesive 400, a medium-firm, pressure-sensitive adhesive with an excellent balance of good initial adhesion and good shear-holding power across a range of temperatures
• ADAPTABLE TO A VARIETY OF SURFACES: Adheres to difficult, varied, and textured surfaces for versatile general-purpose use
• MADE FOR MANY APPLICATIONS: Ideal for bonding mat board in picture frames and dust covers; menus, invitations, table tents, and cards; commercial print assembly; and point-of-purchase promotional displays and inserts
• A COMPLETE SOLUTION: This tape is designed for use with Scotch ATG Adhesive Applicators for quick and controlled application without mess or cleanup

• Prepare Surfaces — Ensure the surfaces you wish to bond are clean, dry, and free from dust, oil, or other contaminants. For best adhesion, lightly wipe surfaces with isopropyl alcohol and allow to dry completely.
• Apply Tape with Applicator — Load the tape into a Scotch ATG Adhesive Applicator. Position the applicator over the surface where you want to apply the adhesive. Press down and pull the applicator across the surface to dispense the tape.
• Transfer Adhesive — Once the tape is dispensed, lift the applicator. The adhesive will remain on your surface, and the liner will be rewound into the applicator. Immediately press the second surface onto the applied adhesive.
• Apply Pressure — Apply firm pressure to the bonded surfaces to ensure maximum adhesion. Allow the bond to set for optimal strength, especially for demanding applications.

Typical situations where 3M Scotch ATG Adhesive Transfer Tape 924 helps — illustrative scenarios, not customer reviews.